Brand New & Boxed with 12 month Manufacturers Guarantee

Elecro EVO 900 3kw Digital Pond Heater

Construction

The Elecro 900 EVO Aquatic heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.

Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.

The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.

Operation

The desired water temperature can be easily selected on the 900 EVO Aquatic heater using the easily programmable digital thermostat. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).

Description:

Digital Aquatic Heaters 2kw – 8kW

Robust, durable construction
Fully Equipped
Easy Installation
Titanium heating elements
Titanium or 316 Stainless Steel flow tube
Ultra-reliable flow switch allows safe operation as low as 1m³/hour
May be floor or vertically wall mounted
Digital control thermostat 0-40°C (0.5°C differential)
Digital temperature display
Anti-cycle protection
Optional integrated 24-hour time clock
Safety thermal cut our 60°C (manual reset)
1½" BSP female threaded water connections